WiFi Hotspots For Your Hotel - A Guide to Providing Guest Internet Access

 Many guests now expect Internet connection to be provided, making offering guest Internet access in your hotel a useful additional revenue stream. Systems can be as straightforward as a $50 WiFi router in the hotel lobby or as complicated as setting up network points in every room and running an on-site server. For more details 192.168.100.l

Access to a guest room or lobby

You should start by deciding if you want to offer access in each guest room or only the lobby. Access in every guest room may turn into a considerably bigger effort depending on how your house is laid up.

Wireless or wired

Whether you want your visitors to use a wired or wireless network connection to access the Internet is an additional crucial decision. In general, WiFi is more widely used and simpler to set up. When WiFi reception is weak, as it often is in structures with very thick walls, wired (LAN) connection may perform better. Running new wiring to each guest room can be very disruptive unless you already have Cat5 wiring installed.

How many wireless access points are there?

A site survey is the simplest approach to figure out how many WiFi access points you need. A laptop and a WiFi router are required. You may test the range of the signal by placing the router in a promising location (it is not necessary for it to be connected to the internet at this time) and moving about with the laptop. It is worthwhile to experiment with several WiFi channels because the signal strength can occasionally change significantly. Some suggestions to broaden the scope

Mount the AP on a wall as high as you can.

To strengthen the signal, think about utilising an external antenna.

A line of sight from the AP to the hotspot area should be attempted.

Avoid installing APs next to heavy objects made of metal or inside of metal doors.

Although every property is unique, in general, if it has more than one story, you might think about including an access point in the stairwell on each floor. You can need numerous APs per floor for a larger, more dispersed property.

Connecting wireless APs with LAN, WDS, or HomePlug

It's important to consider how they will connect back to your Internet connection once you've determined how many APs you need for your property. This is simple if you only need one AP because you can place it close to your cable or DSL connection. It may be additional work for numerous APs, especially if they are located on different floors of a structure. One choice is to connect each AP back to a central router that is linked to the Internet using a wired network connection - This connection is referred to as the "backbone" in the industry. The utilisation of Wireless Distribution System is a fun alternative (WDS). Some WiFi routers support this protocol, which enables them to connect to one another and cover a larger area. Utilizing HomePlug networking devices, which transmit data over electrical wiring from a standard outlet, is the final option. A WiFi router on one floor of your hotel may be linked to your main Internet network using two home plug devices.